FCUA-CT100 9" Replacement LCD Monitor for Mitsubishi E60 E68 M64 M64s CNC CRT

FCUA-CT100compatible LCD display 9 inch for E64 M64 M300 CNC system CRT monitor

FCUA-CT100CRT monitors, for 9-inch single amber CRT monitors, Mitsubishi CNC systemcommonly used in the M3 M310 E60 M64 M64S C64 used in the system.

 I can also offer M500 M520 CNC system type monitor.You can find it from the store.

MitsubishiFCUA-CT100, Mitsubishi M64 E60 CNC machine tools display system parameters:

1,CRT (cathode ray tube) size 9-inch, 90-degree view angle, Neck Diameter 20mm,color: amber-proof standard: T-Band Standard

2,the signal input: analog video signal (n) 0 - 2.3V, the horizontal line stepwaysync, TTL digital signal (positive polarity), field-step approach verticalsync, TTL digital signal (positive polarity)

3,scanning frequency: Line Frequency H = 24Khz, field frequency V == 50.5Hz

4,the video display size: horizontal 160mm +/- 3mm, vertical 110mm +/- 3mm

5.Power: AC100-230V (50 / 60Hz)

6,the signal input: VIA Standard 10 PIN EDGE connector

OriginalFCUA-CT100 CRT monitors as follows:

The replacement LCD display as follows:

Howto install it: