- Description
- Reviews
FEATURES
- Supports CGA/EGA/YUV signal input.
- Supports VGA output 640*480,800*600,1024*768,1360*768
- CGA/EGA signal auto scan (15K,24K,31K)
- YUV signal auto scan (480i,576i,720i,1080i,480p,576p,720p,1080p)
- Chinese and English OSD.
- Supports position control & zoom control.
- True digital 24-bit A/D converter for true 16.7-million color conversion.
- Supports all VGA monitor (CRT、LCD、PDP、PROJECT……)
SPECIFICATIONS
Power
DC5V 2A +/- 0.5v
P7 or P9
Input signal
CGA/EGA
14.5-16.5K
23.5-25.5K
30.5-32.5K
Auto scan
P3 or P11 or P10
RGBHV
30.5-32.5K
Auto scan
P10 or P11
VGA
30.5-32.5K
Auto scan
P10 or P11
Ypbpr
480p,576p,720p,1080p
Auto scan
P2
Ycbcr
480i,576i,720i,1080i
Auto scan
P2
Output signal
VGA
640*480,800*600
1024*768,1360*768
P4 and P12
User control
Input Switch, Image Zoom, Image Position,
Output Resolution ,RGB gain adjust.
Menu Key
RGB VR
Dimensions
115*105*20mm
MENU CONTROL
- “MENU” open OSD menu, and enter.
- “UP” up and increase.
- “DOWN/AUTO” down and reduce.
Press this key: auto scan CGA/EGA signal
Press this key over 5 second and release: reset system
** (this operation is invalid when you open OSD menu)
- “SW” switch input signal Ypbpr/RGBS/RGBHV.
** (this operation is invalid when you open OSD menu)
- “Clamp sp” & “Clamp” please don’t adjust this button, except the monitor has black item or picture discoloration.
- For more functions control, please look at OSD to operate.
FAQ
No signal on you monitor
-please check the input and output cables, make sure all cables are connected. And make sure power is on.
The monitor says “No signal”
-please press “SW” to switch input signal.
Input not supports
-when your monitor displays “input not supports”, maybe you need change to low resolution.
Please press “DOWN/AUTO” over 5 second and release. Reset resolution to 800*600.
Image not full on you screen
-please enter menu to adjust image position and zoom.
Image shake or freeze
-please press “DOWN/AUTO”, system will auto scan input signal and restore image.
Have black item on screen, or all screen too black, or picture discoloration
-please adjust “Clamp sp” and “Clamp st”, please keep “Clamp st” less than “Clamp sp”.
-we suggest “Clamp st” SET “03” , “Clamp sp” SET “04”.
Image color not right
-please adjust RGB VR.
Packing list :
1× Converter Board HD9800
1× Connection Cable
Specification Download
- Supports CGA/EGA/YUV signal input.
- Supports VGA output 640*480,800*600,1024*768,1360*768
- CGA/EGA signal auto scan (15K,24K,31K)
- YUV signal auto scan (480i,576i,720i,1080i,480p,576p,720p,1080p)
- Chinese and English OSD.
- Supports position control & zoom control.
- True digital 24-bit A/D converter for true 16.7-million color conversion.
- Supports all VGA monitor (CRT、LCD、PDP、PROJECT……)
SPECIFICATIONS
Power
DC5V 2A +/- 0.5v
P7 or P9
Input signal
CGA/EGA
14.5-16.5K
23.5-25.5K
30.5-32.5K
Auto scan
P3 or P11 or P10
RGBHV
30.5-32.5K
Auto scan
P10 or P11
VGA
30.5-32.5K
Auto scan
P10 or P11
Ypbpr
480p,576p,720p,1080p
Auto scan
P2
Ycbcr
480i,576i,720i,1080i
Auto scan
P2
Output signal
VGA
640*480,800*600
1024*768,1360*768
P4 and P12
User control
Input Switch, Image Zoom, Image Position,
Output Resolution ,RGB gain adjust.
Menu Key
RGB VR
Dimensions
115*105*20mm
MENU CONTROL
- “MENU” open OSD menu, and enter.
- “UP” up and increase.
- “DOWN/AUTO” down and reduce.
Press this key: auto scan CGA/EGA signal
Press this key over 5 second and release: reset system
** (this operation is invalid when you open OSD menu)
- “SW” switch input signal Ypbpr/RGBS/RGBHV.
** (this operation is invalid when you open OSD menu)
- “Clamp sp” & “Clamp” please don’t adjust this button, except the monitor has black item or picture discoloration.
- For more functions control, please look at OSD to operate.
FAQ
No signal on you monitor
-please check the input and output cables, make sure all cables are connected. And make sure power is on.
The monitor says “No signal”
-please press “SW” to switch input signal.
Input not supports
-when your monitor displays “input not supports”, maybe you need change to low resolution.
Please press “DOWN/AUTO” over 5 second and release. Reset resolution to 800*600.
Image not full on you screen
-please enter menu to adjust image position and zoom.
Image shake or freeze
-please press “DOWN/AUTO”, system will auto scan input signal and restore image.
Have black item on screen, or all screen too black, or picture discoloration
-please adjust “Clamp sp” and “Clamp st”, please keep “Clamp st” less than “Clamp sp”.
-we suggest “Clamp st” SET “03” , “Clamp sp” SET “04”.
Image color not right
-please adjust RGB VR.
Packing list :
1× Converter Board HD9800
1× Connection Cable
Specification Download
Recommended products
- New BN44-00341A I46F1_AHS Samsung Power Supply Backl
- $84.00
$69.72
- Sanyo DP32746 Power Supply Board 1AA4B10N1630A N3HF
- $72.00
$59.76
- UA40EH5003R Power Board BN44-00496B REV1.2
- $45.00
$37.35