- Description
- Reviews
MITSUBISHI AC SERVO DRIVER MR-J4-100B.
New original.Warranty 12 months.
Specification
mode name |
MR-J4-100B |
|
Stocked Item |
S |
|
Output |
Rated Voltage |
3-phase 170 VAC |
Rated Current (A) |
6.0 |
|
Main Circuit Power Supply |
Voltage/Frequency |
3-phase 200 VAC to 240 VAC, 50/60 Hz |
Rated Current (A) |
5.0 |
|
Permissible Voltage Fluctuation |
3-phase 170 VAC to 264 VAC |
|
Permissible Frequency Fluctuation |
±5% maximum |
|
Control Circuit Power Supply |
Voltage/Frequency |
1-phase 200 VAC to 240 VAC, 50/60 Hz |
Rated Current (A) |
0.2 |
|
Permissible Voltage Fluctuation |
1-phase 170 VAC to 264 VAC |
|
Permissible Frequency Fluctuation |
±5% maximum |
|
Power Consumption (W) |
30 |
|
Interface Power Supply |
24 VDC ±10% (required current capacity: 0.3 A (including CN8 connector signal)) |
|
Load-Side Encoder Interface |
Mitsubishi high-speed serial communication |
|
Tolerable Regenerative Power of the Built-in Regenerative Resistor(W) |
20 |
|
Control Method |
Sine-wave PWM control/current control method |
|
Dynamic Brake |
Built-in |
|
Protective Functions |
Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, under-voltage protection, instantaneous power failure protection, over-speed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection |
|
Fully Closed Loop Control |
Available in the future |
|
Safety Function |
STO (IEC/EN 61800-5-2) |
|
Communication Function |
USB: Connect a personal computer (MR Configurator2 compatible) |
|
Structure (IP Rating) |
Force cooling, open (IP20) |
|
Close Mounting |
Possible |
|
Weight (kg) |
1.4 |
Recommended products
- NEW&ORIGINAL FANUC ENCODER A860-0360-V501
- $691.00
$573.53