cartridge detection sensor for Brother MFC- J430W J625DW J825DW J6710DW J6910DW

€7.38
  • Beschreibung
  • Bewertungen

***this part is only for the engineer who have many experience in maintenance service

   if you are a end user and don't have any experience, pls don't buy it. thank you!

 

1, Your buying:  6 pcs of this sensor components,   use on ink cartridge detection only  

    note: MFC-J430W J625DW J825 J6710 J6910 J5910 can use it on upper/bottom module.

             other brother inkjet printers only can use it on upper module.       

    ***pls check below description on the sensors of cartridge base.

 

 

 

2,  description of cartridge base and sensor modules:

   (1)normally, the cartridge base of brother printer is similar as below picture.

 

     (a) upper module, ink cartridge detection sensor,  have 4 pcs of sensor component,

           to detect /recognize ink cartridge 

         (all brother inkject printer can use this sensor component)

 

    (c) bottom module,  ink cartridge detection sensor,  have 4 pcs of sensor component,

         to detect /recognize ink cartridge

       (note: only MFC-J430W J625DW J825 J6710 J6910 J5910 have bottom module, and  can use this sensor component)

 

     (b) middle module, ink remaining sensor, have 4 pcs of sensor component, 

         to detect ink level only   (note: my sensor component can't match this part)


(2)how to check the sensor component is working well or not.

   (note: pls use compatible ink cartridge to check, the original/OEM can't use this way)

 

     (A) if error on LCD: No Ink Cartridge Black, install the C/M/Y cartridge to the black, 

           if printer still can't recognize,

                 that means the uppper/bottom sensor on black position might be bad.

                      replace these two components with new one, it will be ok.

 

     (B) if error on LCD: No Ink Cartridge Cyan, install the M/Y cartridge to the Cyan, 

           if printer still can't recognize,

                 that means the uppper/bottom sensor on Cyan position might be bad.

                      replace these two components, it will be ok.

   

      another way to check:  

          press  key quickly:  menu, * ,  2,  8,  6, 4,  then enter maintenance service

          then press  3,  2 (to check the sensors),  it will show the error code, 

 

          -->if Error code : "no ink cartridge xx", 2A (black), 2B (yellow), 2C (cyan), 2D(maganta),      

              that means ink cartridge detection sensor components might be defective. 

 

         -->but if Error code of  "cannot detect", 20 (black), 21 (yellow), 22 (cyan), 23(maganta)

                ink cartridge detection sensor components might be defective

                  or ink remaining sensor compontes might be defective. 

 

(c) but we still need a further test if you have opened the printer. 

         the contacts between pin of component of sensor PCB and the mainboard are all ok or not.

          (if the pipe line and the pins loose contact, it will cause same problem)

 

4, note for maintenance.

    (a) this component have direction, pls don't make any mistake on it.

    (b) pls fix this component in short time.

    (c) after fixing this component, pls use multi-meter to check copper wire.

    (d) if the copper is bad, pls use wire to connect them directly.

 


Ship to worldwide via post air mail with tracking number.


Item Include
10pcs* cartridge sensor

 

SHIPPING
1. Shipping to worldwide.  If send by post air mail usually to Europe within 15 days after sent out.
2. Orders processed within 24-48 hours of payment verification.
3. The images shown are the actual item and photographed by myself.  
4. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
5. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 

 

PAYMENTS

1. Payment must be made within 4 days of auction closing. (Non-payment may result in a UPI (Unpaid Item) being put on your account.

3. TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling).

4. S&H will be determined based upon the SHIP TO address. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.

5. Please list your special requests (color, packages, etc.) 

Feedback

If you have any problems or concerns whatever with your order or products ,please message us and give us a chance to assist you before you leave any feedback,we believe we can produce a positive outcome to any situation and will work hard to earn your praise.

Wählen Sie ein Ranking für diesen Artikel. 1 Stern ist die schlechteste und 5 Sterne ist die beste.

*

HINWEIS: HTML-Tags sind nicht erlaubt.
HINWEIS: Bewertungen bedürfen der vorherigen Zustimmung, bevor sie angezeigt werden
payment
Urheberrecht © 2024 assemba.com. Certified Global Merchants