ECMA-C20807RS+ASD-B2-0721-B DELTA 750w 3000rpm 2.39Nm AC servo motor driver kits

  • Model: ASD-B2-0721-B+ECMA-C20807RS
  • 28 Units in Stock
  • Write Review
$515.00
$437.75
  • Description
  • Reviews


Delta ASD-B2-0721-B+ECMA-C20807RS AC servo motor&drive80mm 750w 2.39NM 3000rpm



100% quality warranty !


Ship to worldwide BY DHL/EMS/Fedex with tracking number.


ASD-B2-0721-B + ECMA-C20807RS Delta AC servo motor & drive kit & 3 mt kabel

Motor + Stick + 3 Mt Encoder Kabel und Netzkabel

produkt-eigenschaft:

1. leistungsbereich: kw ~ 3kW

2. eingangsspannung: AC 200 V ~ 230 V, einphasige/drei phase oder drei-phase eingang.

3. ort/Geschwindigkeit/Drehmoment.

4. kodieren auflösung ist 17 bit (160000 ppr).

5. High speed puls eingang (4 MPPS).

6. unterstützung Modbus kommunikationsprotokoll (kommunikation port: RS-485/RS-422/RS-232)

7. die realisierung von hoher präzision positionierung control:

1) ASDA-B2 serie unterstützen 17bit (160000 ppr) hohe auflösung kodieren, erfüllen die notwendigkeit der maschine und ausrüstung hohe auflösung lage kontrolle und laufruhe bei niedriger geschwindigkeit.

2) Mit drei sätze von automatische resonanz unterdrückung filter, effektiv die vibration von agentur action, so es mehr reibungslos und mehr komplette.

8. einfache bedienung, spart kosten:

1) stromkabel und kodieren kabel shared mit die ASDA-B serie, und spiel die ECMA serie motor mit der gleichen größe. es ist einfach für die ursprüngliche kunden direkt aufgerüstet ASDA-B2 serie.

2) steuerung betrieb, kann direkt auf dem stick

3) Schraube typ leiterplatte design, nicht benötigen zusätzliche steckverbinder, spart zeit und spart kosten.

4) Eingebaute retrogradation widerstand (mehr als 400 watt), nehmen sie nicht eine verdrahtung raum.

anwendung:

bearbeitungszentrum werkzeugaufbewahrung, teilung montagesystem, verschließmaschine, die schermaschine, feeder, drehmaschine, high-speed-wickelmaschine, prober, schneidemaschine, PCB spender, make-up maschine, abfüllanlagen, funkenerosionsmaschine, drucken ausrüstung, häkeln maschine, graviermaschine.

spezifikation:

1 Motor Spezifikationen

modell

ECMA-C20807RS

Produktname

elektronische Kommutierung Motor

Servo Typ

AC Servo

Name der Serie

B2

Nennspannung

220 V

Encoder Typ

inkrementale, 17-bit

Motor Rahmen Größe

80mm

art der Wellendurchmesser und Wellendichtring

nut (mit schraube löcher) w/o mit Dichtring

Wellendurchmesser

S = 19mm

Nennleistung

750 Watt

nenndrehmoment (N)* 1

2,39

Max. drehmoment (N)

7,16

Nenndrehzahl

3000 rpm

Max. geschwindigkeit

5000 rpm

nennstrom (A)

5,10

Max. strom (A)

15,3

leistung (kW/s) (ohne bremse)

48,4

Rotor trägheitsmoment (× 10-4kg. m2) (ohne bremse)

1,13

mechanische zeit konstante (MS) (ohne bremse)

0,62

drehmoment konstant KT (N/A)

0,47

spannung konstant KE (mV/(r/min))

17,2

anker widerstand (Ohm)

0,42

anker induktivität (mH)

3,53

elektrische zeit konstante (MS)

8,36

isolierung klasse

klasse A (UL), Klasse B (CE)

isolationswiderstand

> 100 Mt ohm, DC 500 V

isolationsfestigkeit

AC 1500 V, 60 sec

gewicht (kg) (ohne bremse)

3,0Kg

Max. radial welle last (N)

245

Max. thrust welle last (N)

98

Vibration grade (um)

15

betriebstemperatur

0 ~ 40 grad celsius

lagertemperatur

-10 ~ 80 grad celsius

luftfeuchtigkeit

20% zu 90% RH (nicht kondensierend)

lagerung luftfeuchtigkeit

20% zu 90% RH (nicht kondensierend)

Vibration kapazität

2,5G

IP Bewertung

IP65

zulassungen

CE UL

2 Stick Spezifikationen

modell

ASD-B2-0721-B

Produktname

AC SERVO Drive

serie

B2

modell Typ

B

Power

versorgung

Phase/Spannung

drei phase: 170 ~ 255VAC, 50/60Hz ± 5%

einphasige: 200 ~ 255VAC, 50/60Hz ± 5%

kontinuierliche Ausgangsstrom

5,1 Arme

kühlungsmethode

natürlichen Luftzirkulation

Encoder Auflösung/Feedback Auflösung

17-bit (160000 p/rev)

Hauptstromkreis Control

SVPWM Control

Tuning Modes

Auto/Manuelle

dynamische Bremse

eingebaute

Position

Control

modus

Max. Input Puls

frequenz

Line driver: Max. 500 Kpps (low speed)/Max.4Mpps (high speed) Open sammler: Max. 200 Kpps

Impulstyp

impuls + Richtung, eine phase + B phase, CCW impuls + CW puls

befehl Quelle

externe puls zug

glättung Strategie

tiefpassfilter

elektronische Getriebe

elektronische getriebe N/M mehrere N: 1 ~ (2 26-1)/M: 1 ~ (2 31-1)

1/50 < N/M < 25600

drehmoment Grenze Betrieb

durch parameter

Feed Vorwärts Entschädigung

durch parameter

geschwindigkeit

Control

modus

Analog

eingang

befehl

spannung

palette

0 ~ ± 10 VDC

eingang

widerstand

10 KOHM

zeit

konstante

2,2 uns

Drehzahlregelung Palette* 1

1: 5000

befehl Quelle

externen analogen signal/Interne parameter

glättung Strategie

Low-pass und s-kurve filter

drehmoment Grenze Betrieb

durch parameter oder über analogeingang

reaktionsfähigkeit

merkmal

maximale 550Hz

geschwindigkeit Fluktuation Rate* 2(bei nenndrehzahl)

0.01% oder weniger zu lastschwankungen 0 zu 100%

0.01% oder weniger bei fluktuation ± 10%

0.01% oder weniger bei 0 bis 50 grad celsius umgebungs temperaturschwankungen

drehmoment

Control

modus

Analog

befehl

eingang

spannung

palette

0 ~ ± 10 VDC

eingang

widerstand

10 KOHM

zeit

konstante

2,2 uns

befehl Quelle

externen analogen signal/Interne parameter

glättung Strategie

tiefpassfilter

Geschwindigkeitsbegrenzung Betrieb

Parameter Einstellung oder über analogeingang

Analog Monitor Ausgang

Monitor kann durch parameter (ausgangsspannungsbereich: ± 8 V)

Kommunikationsschnittstelle

RS-232/RS-485


SHIPPING
1. Shipping to worldwide.  If send by post air mail usually to Europe within 15 days after sent out.
2. Orders processed within 24-48 hours of payment verification.
3. The images shown are the actual item and photographed by myself.  
4. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
5. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 

 

PAYMENTS

1. Payment must be made within 4 days of auction closing. (Non-payment may result in a UPI (Unpaid Item) being put on your account.

3. TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling).

4. S&H will be determined based upon the SHIP TO address. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.

5. Please list your special requests (color, packages, etc.) 

Feedback

If you have any problems or concerns whatever with your order or products ,please message us and give us a chance to assist you before you leave any feedback,we believe we can produce a positive outcome to any situation and will work hard to earn your praise.

Wählen Sie ein Ranking für diesen Artikel. 1 Stern ist die schlechteste und 5 Sterne ist die beste.

*

HINWEIS: HTML-Tags sind nicht erlaubt.
HINWEIS: Bewertungen bedürfen der vorherigen Zustimmung, bevor sie angezeigt werden
payment
Copyright © 2024 assemba.com. Powered by Zen Cart Certified Global Merchants